Microsoft Teredo Tunneling Pseudo Interface

by

Windows is one of the most widely used desktop platforms in the world. It has millions of users who use this system every day to accomplish a lot of different tasks. Over the years, Windows has evolved a lot and with time the developers have made it more user-friendly. But, unfortunately not everything can go perfect and therefore several errors come up with time. One of the problems Windows users face is Teredo Tunneling Pseudo-Interface. Now, these problems need to be dealt with by the users.

I have norton 360,ran diagnostic report/PC Tuneup detail and said to run device manager -norton 360 has detected inoperable hareware devices.On device manager I click on network adapters to update software driver and states windows has determined the driver software for your device is up to date.So when I click to Teredo Tunneling Pseudo. Teredo defines several different kinds of nodes: Teredo client A host that has IPv4 connectivity to the Internet from behind a NAT and uses the Teredo tunneling protocol to access the IPv6 Internet. Teredo clients are assigned an IPv6 address that starts with the Teredo prefix (2001::/32). Update the driver for Microsoft Teredo Tunneling Adaptor. Go to manufacture's site to download the driver. Go to Device Manager and look for Teredo Tunneling Pseudo-Interface, right click on it and select 'Update Driver Software' c. Browse my computer for driver software, then select 'Let me pick from a list of device drivers on my computer'. Also, when I look at ipconfig /all it shows that the Microsoft Teredo Tunneling Adapter is connected. I have attached screen shots of both the unidentified network notice and the ipconfig /all screen.

Have you faced such an error before? Yes? Then you must read this article because we will be discussing Teredo Tunneling Pseudo-Interface and how to solve it.

What Is Teredo Tunneling Pseudo-Interface?

If you have not heard about this term before, then you must pay good attention to this section. The term Teredo Tunneling Pseudo-Interface is a kind of protocol which enables different computer systems behind a NAT firewall and which has no native IPv6 connection to obtain remote IPv6 resources. In simple words, the home users would be able to access the IPv6 web services even before their local internet connection supports this protocol which makes the changeover from the IPv4 much less difficult.

Teredo Tunneling Pseudo-Interface was developed as a solution by a Windows 7 Ultimate user who found it out after carrying out a configuration in the command prompt. So, you are now able to access the IPv6 network when you are on an IPv4 network even though you are not authorized for IPv6.

Here’s a post on How to remove acresso software manager?

How to disable the Tunneling Pseudo-Interface?

Microsoft Teredo Tunneling Pseudo-interface

After a lot of research and exploration, developers have found out some effective ways of a fix by which they can solve this issue of Tunneling Pseudo-Interface. Let us have a look at those solutions in the section below.

Uninstall all Teredo Tunneling Adapters & Interfaces

  1. Press the Windows logo key and R simultaneously. Then type devmgmt.MSC and press Enter.
  2. Search for Teredo Tunneling Pseudo-Interface under category Network adapters.
  3. Then, right-click on Teredo Tunneling Pseudo-Interface and click Uninstall.
  4. If you see any other options related to it, uninstall them as well.
  5. Now, click Action at the top and Add legacy hardware and click Next.
  6. Click Network Adapter and select the Microsoft option on the left panel and Microsoft Teredo Tunneling Adapter on the right panel.
  7. Click on Next and you will be done.

Use a Third-party application

Using a third party application is probably much easier for many users to solve this issue. You can find different applications which will help you solve this problem. These applications automatically search for errors and faults in your system and will recover it by itself. Just search it up on the Internet and solve the Tunneling Pseudo-Interface problem which you are facing.

Microsoft

Also read: How to Fix Blue screen of death error

Using The Command Prompt

If none of the above works, you can use the command prompt method.

Microsoft teredo tunneling pseudo-interface driver windows 7
  1. Type CMD in the windows start menu, right-click on it and Run as Administrator.
  2. There, type- netsh, int teredo and set state disabled.
  3. Remember to press Enter after writing each of these commands.
  4. Now go to Device Manager and expand the Network Adapter option.
  5. You will find the Tunneling Pseudo-Interface and uninstall it.
  6. Open the CMD and type in the commands we mentioned above once again similarly.
  7. Open Device Manager and click on Scan for the new hardware changes.

So these are the few important and effective ways to solve the Tunneling Pseudo-Interface problem. The steps are easy to follow and carry out. We have mentioned all the steps required. Read the article carefully and execute each step carefully to get rid of the problem easily.

-->

This article provides a solution to an issue where DirectAccess clients that use Teredo tunneling cannot connect after upgrade to Windows 10.

Microsoft Teredo Tunneling Pseudo Interface Driver

Original product version: Windows 10, version 1809, and later versions, Windows 10, version 1803
Original KB number: 4510763

Symptoms

On a computer on which you have DirectAccess clients configured to use Teredo tunneling, you upgrade the operating system to Windows 10, version 1803 and later versions of Windows 10. After the upgrade, the DirectAccess clients cannot connect.

At this point, if you run netsh interface teredo, the command returns a message that states that Teredo tunneling is disabled.

Cause

This issue occurs because Teredo tunneling is disabled by default in Windows 10, version 1803 and later versions of Windows 10.

Resolution

Download Teredo Tunneling Pseudo Interface

How to avoid this issue

Before you upgrade the system to Windows 10, make sure that Teredo tunneling is enabled by using Group Policy.

To do this, browse to the following policy in Group Policy:
Computer Configuration > Policies > Administrative Templates > Network > TCPIP Settings > IPV6 Transition Technologies > Set Teredo State

Teredo

Then, set the states to Client or Enterprise Client.

How to fix this issue

Microsoft Teredo Tunneling Pseudo InterfaceMicrosoft teredo tunneling pseudo-interface driver download

If you already experience this issue, use one of the following methods to fix it.

  • Run the following command on each DA client to enable Teredo tunneling:

  • Configure the Set Teredo State Group Policy that is mentioned under 'How to avoid this issue' to enable Teredo tunneling.

Teredo Tunneling Pseudo Interface Disable

Note

Microsoft Teredo Tunneling Pseudo-interface Driver Windows 7

If you have to connect to the internal resource remotely to configure the policy, use IPHTTPS to connect to the DirectAccess Server or use VPN.